Does the waterproof film of the membrane switch affect the touch sensation?
The waterproof film of the membrane switch does indeed affect the touch sensation, but this effect can be controlled through design and material selection, and it is not necessarily a bad thing.
1. Why does the waterproof film affect the touch sensation?
The waterproof film is usually a thin PET or PU film that covers the metal contact points and prevents water from seeping into the key area. Its presence alters the mechanical feedback when pressing:
Increased initial resistance: When the finger presses, one must first overcome the tension of the waterproof film before touching the metal contact point. This makes the key feel more "solid" and "thick", lacking the crisp "click" sensation that is so clear and decisive.
Reduced rebound speed: The waterproof film absorbs part of the rebound force of the metal contact point, causing the key to rebound more slowly. When pressing quickly in succession, it may feel that the response cannot keep up with the hand speed.
Changed sound feedback: The waterproof film suppresses the crisp "click" sound emitted when the metal contact point collapses, resulting in a lower and more indistinct sound.
2. How significant is this effect?
It depends on the thickness and material of the waterproof film:
| Type of waterproof film | Thickness | Effect on touch sensation | Typical applications |
| Ultra-thin PET film | 0.025mm - 0.05mm | Almost no effect. The touch feels similar to the state without the waterproof film, and the sound feedback is slightly reduced. | High-end consumer electronics, medical equipment |
| Standard PET film | 0.075mm - 0.125mm | Minor effect. The initial resistance slightly increases, but most users do not notice it. | Industrial control, automotive interiors |
| Thick PU film | 0.15mm - 0.25mm | Significant effect. The touch becomes "coarse", the rebound slows down, and the sound becomes muffled. | Outdoor equipment, heavy industrial scenarios |
| Silicone waterproof cap | 0.5mm - 1.0mm | Severe effect. The touch becomes softer, the paragraph sensation disappears, and it feels more like a silicone button. | Waterproof keyboard, walkie-talkie |
3. How to balance waterproofing and touch feel?
If your product has strict requirements for touch feel (such as in car dashboards or medical equipment), you can optimize it in the following ways:
Choose ultra-thin PET film: A 0.025mm PET film has almost no impact on touch feel, and can be ignored.
Adjust metal spring clips: Use metal spring clips with greater force (such as over 250g), to compensate for the increased resistance caused by the waterproof film.
Optimize the shape of the spring clips: Use cross-shaped or triangular spring clips, as they collapse more neatly and have less impact on the waterproof film.
Add a backlight spacer: Add a thin spacer between the waterproof film and the panel to provide more space for the spring clips to collapse, improving the touch feel.
Use a silicone waterproof cap: If the waterproof requirement is extremely high (IP68), consider using a silicone waterproof cap instead of the film-based waterproof film. Although the touch feel will become softer, the waterproof performance will be more reliable.
Summary
The waterproof film will definitely affect the touch sensation, but through reasonable design, this effect can be controlled to the extent that users hardly notice it. If you have very high requirements for touch sensation, please consider the following:
1. Clearly inform the supplier of your touch sensation requirements (such as "need a clear paragraph sense").
2. Request sample testing and personally press to feel.
3. Choose experienced suppliers, as they know how to balance waterproofing and touch sensation.
