Welcome to LuphiTouch®!
Today is 2026.11.09 , Monday
Leave Your Message
News Categories
    Featured News

    What factors can affect the conductive silver paste of the membrane switch?

    2026-06-12

    The conductive silver paste used in membrane switches has excellent performance, but its conductivity and stability are highly susceptible to various factors such as material formulation, manufacturing process, and external environment. These can be summarized into the following core dimensions:

    machinery equipment (2).jpg

    1. Material formulation and component factors
    Silver powder characteristics: The content, size, shape and purity of the silver particles in the silver paste directly determine the conductivity. An appropriate silver content range is between 60% and 70%. Too low a content will result in unstable resistance, while too high a content may reduce the adhesion. Additionally, sheet-shaped silver powder has a larger contact area than spherical silver powder and thus offers better conductivity; if trace amounts of oxygen, sulfur, etc. are mixed into the silver powder, an insulating film will form on the surface, significantly reducing conductivity.
    Organic carrier (resin and solvent): Excessive resin content will hinder electron transfer; if the glass transition temperature of the resin is set improperly, during the curing process, it will squeeze the conductive framework, leading to a decline in performance. At the same time, the evaporation rate and polarity of the solvent will also affect the printing suitability of the silver paste and the adhesion to the substrate.

    2. Manufacturing and Printing Process Factors
    Curing and Drying Methods: The curing temperature and time have a significant impact on the resistance value. Insufficient curing or excessive solvent can not only cause the resistance to increase, but also reduce the anti-silver migration performance of the insulating layer. Scientific curing usually requires multiple stages such as low-temperature pre-heating, room temperature standing, and rapid infrared curing to ensure that the solvent is fully evaporated and the optimal properties are achieved.
    Printing Thickness and Uniformity: The thickness of the silver paste layer directly affects the contact resistance. If the printing is too thin, the initial resistance may be acceptable, but after tens of thousands of presses, the silver layer is prone to wear, resulting in a sharp increase in resistance or even button malfunction.
    Mixing and Dispersion: The silver paste has high viscosity and thixotropy. If it is not fully mixed before use, the ratio of the upper and lower layers will be uneven; unstable mechanical stirring speed or deviation in ultrasonic dispersion parameters will cause silver powder to agglomerate or be unevenly distributed, forming a "broken fishing net" type conductive network.

    3. Environmental and External Usage Factors
    Temperature and humidity environment: High humidity and high temperature are the "danger zones" for silver paste. When water molecules penetrate, they will react chemically with silver to form non-conductive silver oxide; at the same time, high temperature and high humidity will accelerate the electrochemical migration of silver ions, forming "silver bridges" that cause short circuits.
    Electric field and current impact: Under long-term impact of high voltage or high current density, silver ions will undergo electro-migration, resulting in the accumulation of silver powder on the anode and the formation of cavities on the cathode, ultimately causing the conductive path to become fragmented.
    Mechanical stress and substrate compatibility: The silver paste lines on the membrane switch are usually located between the two high-pressure layers of PET substrate and insulating ink. If the cross-connection of the insulating ink layer is too tight, or the surface wettability of the PET sheet is poor, excessive pressure will cause the silver layer to break.

    4. Storage Conditions
    Silver paste is highly sensitive to storage temperature. Excessive temperature will cause solvent evaporation and silver powder agglomeration; while too low temperature will make the resin brittle and the internal stress increase sharply, resulting in the separation of silver powder and resin, completely destroying the stability of the conductive performance.