What is the recommended temperature for drying the membrane keypad?
When drying the membrane keypad, it is recommended to set the temperature of the hair dryer between 40℃ and 50℃, or use the cool air setting directly.

The internal structure of the membrane keypad is very fragile and mainly consists of PET or PC plastic films, conductive silver paste/carbon powder, and adhesive. These materials are extremely sensitive to high temperatures. If the temperature is too high (above 60℃), it is very likely to cause the film to curl and deform due to heat, and even melt and fail the internal isolation gel layer, resulting in the complete failure of the key.
Correct drying operation suggestions:
Maintain a safe distance: The nozzle of the hair dryer should be at least 15 to 20 centimeters away from the surface of the film. Avoid blowing directly and forcefully against the film.
Continuous movement: During the drying process, keep the hair dryer moving back and forth to ensure uniform heating of the film and prevent heat concentration in a certain area.
Patience and waiting: The main function of the hair dryer is to accelerate the evaporation of surface and shallow moisture. Due to the multi-layer composite structure inside the film, it is difficult to completely dry the moisture. After drying the surface, place it in a ventilated and dry place to naturally stand for 24 to 48 hours. Ensure that the moisture in the deep layers of the film has completely evaporated before powering on for testing.
