Welcome to LuphiTouch®!
Today is 2026.11.09 , Monday
Leave Your Message
News Categories
    Featured News

    What thickness is generally recommended for the membrane button panels made of PC material?

    2026-05-18

    When using PC (polycarbonate) material for the panel, the thickness selection mainly depends on the purpose of the panel (whether it is a surface film or a structural component), the size, and the impact resistance requirements.

    productive process (23).jpg
    Generally speaking, the thickness range of PC panels is quite wide (ranging from 0.1mm to 20mm), but for the most common membrane button panels and structural shells, I have summarized the following golden standards for you:

    1. membrane button panels / window lenses (most common)
    If you are referring to the operation panel or transparent window that is attached to the surface of the device, the thickness is usually between 0.25mm and 1.5mm.
    0.25mm - 0.5mm (ultra-thin type):
    Applicable: Small household appliance remote controls, membrane button panels, small instrument panels.
    Features: Good flexibility, suitable for flat or slightly bulging designs, low cost.
    0.5mm - 1.0mm (standard type):
    Applicable: Most industrial control cabinet panels, microwave/laundry panels, car dashboard panels.
    Features: This is the most commonly used thickness range. It has sufficient rigidity (not floppy), maintains good light transmittance, and is easy for screen printing and die-cutting processing.
    1.0mm - 1.5mm (strengthened type):
    Applicable: Large-sized windows (over 20cm wide), panels requiring certain structural support, or lenses to be embedded and installed.
    Features: Thick feel, not prone to deformation, suitable as an alternative to thin glass.

    2. Structural Components / Enclosure / Protective Cover
    If you are referring to using PC boards as the protective cover for equipment, the machine shell, or explosion-proof windows, the thickness is usually between 1.5mm and 5.0mm.
    1.5mm - 3.0mm:
    Applicable: Equipment lining, lightweight protective cover, machine window.
    Features: Good impact resistance, can be cold-formed.
    3.0mm - 5.0mm and above:
    Applicable: Outdoor explosion-proof boxes, bank bulletproof glass (multi-layer composite), heavy-duty mechanical protective screen.
    Features: Extremely difficult to break, usually called "durability board", heavy in weight, processing requires CNC or laser cutting.

    3. Three key considerations for selecting thickness
    When making a decision, please focus on the following three points: 

    Dimensions and Span (To Prevent Collapse)
    Rule: The wider the panel, the thicker the required thickness.
    Recommendation: If the span of your panel exceeds 150mm and there is no support in the middle, it is recommended to choose a thickness of at least 0.75mm or 1.0mm. If it is too thin (such as 0.25mm), large-area panels will be as soft as plastic sheets and are prone to wrinkling or collapsing during installation.

    Impact resistance and temperature resistance (environmental requirements)
    Rule: The harsher the environment, the thicker the thickness.
    Recommendation: If it is for automotive interiors or outdoor equipment, considering the long-term vibration and temperature-induced deformation, it is recommended to start with a thickness of 1.0mm or above to ensure dimensional stability.

    Installation method (backing adhesive vs embedding)
    Back adhesive bonding: If directly applying 3M adhesive to a flat surface, a thickness of approximately 0.5mm is most suitable. A thickness too thick will increase the risk of edge warping.
    Snap-in/screw embedding: If you need to drill holes for screwing, the thickness should be above 1.0mm. Otherwise, when the screws are tightened, they may cause the board to crack or lead to stress cracking.

    Summary of recommendations:
    For regular operation panels (such as industrial control screens, home appliances): The preferred thickness is 0.5mm or 0.75mm. This is the best balance point that takes into account the feel, cost, and processing difficulty.
    Large-sized transparent windows: The preferred thickness is 1.0mm or 1.5mm to ensure flatness.
    Making the shell/protective cover: Start with 2.0mm.
    Pit avoidance tips: Although PC materials have good toughness, if the thickness exceeds 2mm, the bending area usually requires grooving or heating treatment; otherwise, it is prone to stress cracking. For membrane button panels, try to keep the thickness within 1.5mm.