Welcome to LuphiTouch®!
Today is 2026.11.09 , Monday
Leave Your Message
News Categories
    Featured News

    When designing a membrane switch, how should the key spacing be determined?

    2026-06-24

    The design of the key spacing for membrane switches needs to take into account both ergonomic (operational comfort) and manufacturing process (electrical safety and yield) requirements. The following are the detailed design specifications: 

    productive process (5).jpg
    Edge spacing of buttons (core indicator) 
    This is the most crucial design parameter, referring to the minimum distance between the edges of two adjacent keys:

    Standard recommendation: ≥3mm - This is the industry standard minimum safe distance, which can both prevent accidental touching and meet the requirements of the printing process.
    Comfortable operation: ≥5mm - If the product needs to be operated frequently or when wearing gloves, it is recommended to increase the edge spacing to above 5mm to improve operational accuracy and comfort.
    High-density limit: ≥2mm - In extremely limited space conditions, the spacing between the keys and the hollowed-out/well can be 2mm, but this is the lower limit of the manufacturing process and is not recommended for routine use.

    Key center distance (layout reference) 
    From the perspective of ergonomics, the distance between the key and the center of the keypad directly affects the operational experience: 
    Static finger spacing of adults: Approximately 13 to 16 mm
    Optimal dynamic operating finger spacing: Approximately 20 to 25 mm

    This means that if the size of the button itself is 12×12mm and the edge spacing is 3mm, then the center distance is 15mm, which falls within the static spacing range and is suitable for regular operations. If rapid and continuous operations are required (such as on a numeric keypad), it is recommended that the center distance be ≥ 20mm.

    The coordination of key size and spacing 
    The size and spacing of the keys are designed in a coordinated manner and cannot be considered independently:

    Key body size (square)  Recommended circular indicator window Recommended minimum edge spacing Applicable scenarios
    10×10mm Diameter 1.5mm ≥3mm  Function keys, auxiliary keys
    12×12mm  Diameter 2.0mm ≥3~4mm  Common operation keys
    14×14mm Diameter 2.0mm ≥4mm Main function keys
    16×16mm Diameter 2.5mm  ≥4~5mm Key for critical operations
    18×18mm and above Diameter 2.5~3.0mm ≥5mm  Emergency/Key for critical functions

    The limitations imposed by the manufacturing process on the spacing 
    The spacing design must also meet the printing process limitations of the membrane switch: 
    Silver paste line width: ≥ 0.3mm (minimum manufacturable size: 0.2mm)
    Minimum gap between silver paste lines: ≥ 0.5mm
    Line burrs: < 1/3 of the line width
    Line gaps: < 1/4 of the line width 
    This means that there must be a minimum safety gap of 0.5mm between the conductive contacts (silver paste dots) of the two buttons. Additionally, considering the width of the button graphic border, it is practically impossible to achieve an edge spacing of less than 2mm. 
    The relationship between substrate thickness and spacing

    The spacing of the buttons will also affect the selection of the substrate thickness: 
    Spacing > 8mm (conventional layout): A 0.188mm thick PET or PC substrate is sufficient to meet the strength requirements.
    Spacing < 5mm (high-density layout): It is recommended to choose a substrate of 0.25mm or even thicker to prevent deformation and collapse of adjacent areas when pressing a button, which could lead to accidental triggering.

    Adjustment of spacing in special scenarios 
    Wearing gloves for operation (industrial, outdoor): The recommended edge spacing is ≥ 6mm, and the button size should be ≥ 16×16mm. Otherwise, when wearing gloves, it is easy to accidentally touch adjacent buttons.
    For children/elderly users: The recommended edge spacing is ≥ 5mm, and the button size should be appropriately enlarged to reduce the operational difficulty.
    With LED backlight/indicator window: There should be at least 1.2mm spacing between the button and the LED window to prevent light interference and structural interference.
    Metal spring-type: The diameter of the spring is usually 8~25mm. At least 1~2mm of spacing should be left between adjacent springs. Otherwise, when the spring collapses, it may interfere with each other.

    Quick Design Reference 
    Key spacing design checklist:
    Edge spacing ≥ 3mm? (Process baseline)
    Center distance ≥ 15mm? (Operational comfort line)
    For high-frequency/during glove-wearing scenarios, edge spacing ≥ 5~6mm?
    For high-density layouts (spacing < 5mm), substrate thickness ≥ 0.25mm?
    Silver paste contact interval ≥ 0.5mm? (Process limit)
    Distance from LED window ≥ 1.2mm?

    💡 Summary: The core principle for the spacing of membrane switch buttons is that the edge spacing should be ≥ 3mm and the center spacing should be ≥ 15mm. For regular products, designing according to this standard can ensure both the operation experience and manufacturing yield. In special scenarios (such as wearing gloves, high density, with backlight), it is necessary to appropriately relax these standards. When designing, it is recommended to first determine the button size, then calculate the required spacing based on the operation scenario, and finally verify it using the manufacturing process limits.